It can be used in wells with bottomhole circulating temperatures (BHCTs) of 180°F (82°C) and below. Thinking about the fluid loss test, there is always some cement slurry loss of filtrate (water from the cement) but as the test progresses the rate of filtration reduces with time. Fluid loss additives, which are stable against high temperatures and concentrated salt solutions, ensure a reliable cementing job under difficult conditions. These costs resulted from non-productive time, remedial operations expenses and fluid-replacement costs and ranged from $120,000-$170,000 (USD) on individual wells. In almost any operation, loss of fluid to the reservoir formation carries a high risk of permeability damage. Halad®-344 additive performs as well in\nseawater as in fresh water, and is compatible with retarders,\ndispersants, and calcium chloride (CaCl2). Concrete additives are added to the mixture of water cement and aggregate in small quantities to increase the durability of the concrete, to fix concrete behavior and to control setting or hardening. Diacel ® LWL Powder Cement Fluid-Loss / Retarder Additive is a bi-functional additive that is effective both as a retarder and fluid-loss control agent. The material is nonretarding, thus making good compressive strength development possible at low temperatures. +86 17627653229 jhl@cementing-additive… For more than 20 years, fluid loss control agents have been added to oil-well cement slurries and it is now recognized in the industry that the quality of cementing jobs has significantly improved. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01502-A4.pdf","docCreatedDate":"2018-10-02T11:33:17.241-05:00","modifiedDate":"2007-09-18T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:17.241-05:00","docdate":"2007-09-18T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-344 - A4","description":"Halad®-344 fluid-loss additive is especially useful in lightweight cementing compositions that often have long thickening times. A fluid-loss additive made from synthetic polymer technology which is compatible with salt, seawater, and CaCl2 and effective up to 350°F (176.7°C) without over-retarding at temperatures as low as 80°F (26.7°C); it is not a strong dispersant so it can be used in normal and heavyweight slurries. This filter loss may be static or dynamic. Materials and Methods 2.1. Fluid loss additives help prevent water loss from the slurry, and thus, help prevent cement bridging in the annulus. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01332.pdf","docCreatedDate":"2018-10-02T11:33:17.962-05:00","modifiedDate":"2008-06-19T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:17.962-05:00","docdate":"2007-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Materials_Chemicals_&_Additives:Dispersants,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive","description":"Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01330.pdf","docCreatedDate":"2018-10-02T11:33:18.788-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:18.788-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing,Cementing:Cementing_Chemistry,"},{"title":"Halad®-447 Additive A-4 ","description":"Halad®-447 is a fluid-loss additive containing polyvinyl alcohol. Fluid loss control additives are employed for maintaining a constant water/solid ratio in cement slurries downhole by controlling the rate of water loss to adjacent permeable zones through suitable viscosification; otherwise the cement slurries would lose water by filtration into these zones. Helps control fluid loss, viscosifies the slurry, does not retard the cement set, is salt-tolerant up to saturation, and is effective as low as 100°F (37.8°C) and higher than 400°F (204.4°C). Innovative liquid additive to control fluid loss with low concentrations in fresh water, brines, and seawater with effectiveness up to 400°F (204°C). For Gas Migration Control OMNOVA’s gas migration control additives are liquid or free-flowing powders that improve bonding to the formation and pipe. Cement fluid loss must be controlled to obtain the right rheological properties for placing the cement and to ensure a good cement bond to pipe and formation. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02024.pdf","docCreatedDate":"2018-10-02T11:33:07.806-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:07.806-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H02024","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive (Russian)","description":"Halad®-600 E+ -- Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02024R.pdf","docCreatedDate":"2018-10-02T11:33:07.096-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:07.096-05:00","docdate":"2007-08-24T23:30:00.000-05:00","docrefNum":"H02024R","languageSet":["Russian"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-447 Additive (Russian)","description":"Halad-447 Data sheet in Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01501R.pdf","docCreatedDate":"2018-10-02T11:33:01.454-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:01.454-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01501","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges:Optimize_Drilling_Conditions,Fluids_Challenges:Fluid_Loss,Production_Challenges:Long_Term_Zonal_Isolation,Drilling_Challenges:Drill_String_Torque_Drag_Reduction,Reducing_Costs,Environmental_Challenges:Temperature,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Expansion_Additives,Cementing:Materials_Chemicals_&_Additives:Latexes,Cementing:Cementing_Solutions:Gas_Migration,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-22A","description":"Halad®-22A additive is a high-temperature fluid-loss control agent that\nfunctions effectively in freshwater and\nsaltwater slurries. The recommended accelerator is sodium silicate. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02024-A4.pdf","docCreatedDate":"2018-10-02T11:33:07.806-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:07.806-05:00","docdate":"2007-08-24T23:30:00.000-05:00","docrefNum":"H02024-A4","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-413 Additive","description":"Halad®-413 additive is a synthetic polymer that helps\ncontrol filtrate loss in all cement conditions. Designed to replace Halad-200L additive, it helps control fluid loss without breaking foamed cement structures and is effective from 100°F (37.8°C) and higher than 400°F (204.4°C). The material is nonretarding, thus making good compressive strength development possible at low temperatures. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01499.pdf","docCreatedDate":"2018-10-02T11:33:00.846-05:00","modifiedDate":"2008-06-19T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:00.846-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01499","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Materials_Chemicals_&_Additives:Dispersants,"},{"title":"Halad®-344 (Russian)","description":"Halad®-344 fluid-loss additive in the Russian language","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01331R.pdf","docCreatedDate":"2018-10-02T11:32:50.107-05:00","modifiedDate":"2007-08-22T23:30:00.000-05:00","publishDate":"2018-10-02T11:32:50.107-05:00","docdate":"2007-08-22T23:30:00.000-05:00","docrefNum":"H01331R","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-23 Additve","description":"Halad®-23 additive is a high-temperature fluid-loss control agent that functions effectively in freshwater and saltwater slurries.\n","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02389.pdf","docCreatedDate":"2018-10-02T11:33:11.790-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:11.790-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H02389","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-567 Additive (Russian)","description":"Halad-567 Data sheet in Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01502R.pdf","docCreatedDate":"2018-10-02T11:33:17.241-05:00","modifiedDate":"2007-09-18T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:17.241-05:00","docdate":"2007-09-18T23:30:00.000-05:00","languageSet":["Russian"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"HALADVANCE™ 344 Cement Additive Sales Data Sheet","description":"H013281","path":"/content/dam/ps/public/cem/contents/Data_Sheets/web/HALADVANCE-344-Cement-Additive-Sales-Datasheet-H013281.pdf","docCreatedDate":"2019-06-12T09:20:13.897-04:00","modifiedDate":"2019-06-12T09:20:13.897-04:00","docdate":"2019-06-12T09:20:13.897-04:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Materials_Chemicals_&_Additives:Fluid_Loss,Cementing:Cementing_Chemistry:Additives,Cementing:Materials_Chemicals_&_Additives:Additives,Cementing:Cementing_Chemistry:Fluid_Loss,"}]},{"contenttype":"Safety and Compliance","datasource":[{"title":"Halad®-567 Additive - A4","description":"Halad®-567 fluid-loss additive is made from synthetic polymer technology. Google has not performed a legal analysis and makes no representation as to the accuracy of the status listed.) Now Fluid Loss Control Agents are recognized in the industry that the quality of cementing jobs has significantly improved. It is available as a powder or a 20%\nsolution (Halad®-567L additive). Cement slurries are colloidal suspensions consisting of distinct solid and liquid phases. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H04569.pdf","docCreatedDate":"2018-10-02T11:33:20.759-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:20.759-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-300L Additive - A4","description":"Halad®-300L fluid-loss additive is an alternative to Halad®-200 additive. The fluid loss additives, which are one of the three main additives on the oil cement slurry, can effectively reduce the fluid loss of oil cement slurry in the field condition and can also increase the viscosity and improve the stability of oil cement slurry [1 1. SMLZ-108 is a non-retarding synthetic copolymer designed to control the loss of fluid from the slurry in porous environments. A fluid-loss additive similar to Halad 344 additive intended for use with construction grade or off spec cements. Halad-766 fluid-loss additive is extensively used to retard foam slurries without reducing viscosity. WaterWeb® Water Control Uses unique polymer chemistry to help create oil-water separation in the reservoir, impeding water flow and enhancing hydrocarbon flow to the wellbore. It is designed to be used at circulation temperatures up to 104°C (220°F) in low density and high salt content cement slurries. J. F. Baret, “Why cement fluid loss additives are necessary,” Clinical Ne… The water-soluble materials are modified natural polymers, cellulosics, and vinylinic-based polymers. Al Moghera cement fluid loss additives are specifically designed to provide superior control of fluid loss and gas migration over a broad temperature range up to 450˚F (232˚C) in fresh and saltwater slurries. The presence of HPMC polymer in c ement slurry-8 shows less fluid loss than the slurry- 7 which Factors affecting the use of fluid-loss-control additives (FLA) Neat cement slurries normally exhibit an uncontrolled API fluid loss of at least 1,500 cm 3 /30 min. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01331.pdf","docCreatedDate":"2018-10-02T11:32:46.255-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:32:46.255-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-766 (Russian)","description":"Halad®-766 fluid-loss additive can also be used as a retarder. The magnitude of change is directly related to the amount of fluid lost from the slurry. Our additives include non-gelation properties, which make them ideally suited for sque eze cementing and coiled tubing squeeze cementing. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01332.pdf","docCreatedDate":"2018-10-02T11:33:17.962-05:00","modifiedDate":"2008-06-19T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:17.962-05:00","docdate":"2007-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Materials_Chemicals_&_Additives:Dispersants,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive","description":"Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01330.pdf","docCreatedDate":"2018-10-02T11:33:18.788-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:18.788-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing,Cementing:Cementing_Chemistry,"},{"title":"Halad®-447 Additive A-4 ","description":"Halad®-447 is a fluid-loss additive containing polyvinyl alcohol. Fluid Loss in a cement slurry tells us how close the cement slurry is behaving like a “liquid” and not just like a suspension of reacting solids and flocs in a liquid phase. Microgel particles rapidly plug the pores within the cement, causing rapid formation of a thin, impermeable filtercake. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01499R.pdf","docCreatedDate":"2018-10-02T11:33:00.846-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:00.846-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01499","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Materials_Chemicals_&_Additives:Dispersants,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive -A4","description":"Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas. Veritrol 343. A fluid-loss additive designed for use in low-temperature wells (below 180°F or 82.2°C) to prevent retardation of compressive-strength development; acts as a dispersant as well. ADVANTAGE. Our products are compatible in a wide range of oil-well cement slurries. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01499R.pdf","docCreatedDate":"2018-10-02T11:33:00.846-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:00.846-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01499","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Materials_Chemicals_&_Additives:Dispersants,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive -A4","description":"Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01499.pdf","docCreatedDate":"2018-10-02T11:33:00.846-05:00","modifiedDate":"2008-06-19T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:00.846-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01499","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Materials_Chemicals_&_Additives:Dispersants,"},{"title":"Halad®-344 (Russian)","description":"Halad®-344 fluid-loss additive in the Russian language","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01331R.pdf","docCreatedDate":"2018-10-02T11:32:50.107-05:00","modifiedDate":"2007-08-22T23:30:00.000-05:00","publishDate":"2018-10-02T11:32:50.107-05:00","docdate":"2007-08-22T23:30:00.000-05:00","docrefNum":"H01331R","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-23 Additve","description":"Halad®-23 additive is a high-temperature fluid-loss control agent that functions effectively in freshwater and saltwater slurries.\n","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02389.pdf","docCreatedDate":"2018-10-02T11:33:11.790-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:11.790-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H02389","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-567 Additive (Russian)","description":"Halad-567 Data sheet in Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01502R.pdf","docCreatedDate":"2018-10-02T11:33:17.241-05:00","modifiedDate":"2007-09-18T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:17.241-05:00","docdate":"2007-09-18T23:30:00.000-05:00","languageSet":["Russian"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"WAC-9™ fluid-loss additive ","description":"WAC-9™ is a fluid-loss additive designed for use in gelled fracturing fluids.\nfracturing fluids. Of equivalent importance is the slurry density during displacement, which is directly related to fluid-loss control. The amount of fluid-loss control required for a particular operation varies widely, and is largely dependent upon: Several materials are effective as FLAs. The cementing chemicals are the chemical agents dosed in the cement to ensure the smooth cementing operation and good cementing quality. Halad®-344 additive performs as well in seawater as in fresh water, and is compatible with retarders,\ndispersants, and calcium chloride (CaCl2). FLAs are, therefore, used to prevent solids segregation during placement, and to control the rate of fluid leakoff in the static state. This filter loss may be static or dynamic. Our advanced liquid and dry cementing latices enhance several key cementing properties, allowing for simpler slurry designs. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02024.pdf","docCreatedDate":"2018-10-02T11:33:07.806-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:07.806-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H02024","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-600 E+ Additive (Russian)","description":"Halad®-600 E+ -- Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H02024R.pdf","docCreatedDate":"2018-10-02T11:33:07.096-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:07.096-05:00","docdate":"2007-08-24T23:30:00.000-05:00","docrefNum":"H02024R","languageSet":["Russian"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-447 Additive (Russian)","description":"Halad-447 Data sheet in Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01501R.pdf","docCreatedDate":"2018-10-02T11:33:01.454-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:01.454-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01501","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges:Optimize_Drilling_Conditions,Fluids_Challenges:Fluid_Loss,Production_Challenges:Long_Term_Zonal_Isolation,Drilling_Challenges:Drill_String_Torque_Drag_Reduction,Reducing_Costs,Environmental_Challenges:Temperature,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Expansion_Additives,Cementing:Materials_Chemicals_&_Additives:Latexes,Cementing:Cementing_Solutions:Gas_Migration,Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-22A","description":"Halad®-22A additive is a high-temperature fluid-loss control agent that\nfunctions effectively in freshwater and\nsaltwater slurries. IFL-15: PolymerÒc fluid-loss additive for high temperature: It is a polymeric additive designed especially to cement at high temperature (204°C) and to carry out right angle closing. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H04569-A4.pdf","docCreatedDate":"2018-10-02T11:33:23.076-05:00","modifiedDate":"2007-09-18T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:23.076-05:00","docdate":"2007-09-18T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-413 Additive (Russian)","description":"Halad®-413 -- Russian","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01503R.pdf","docCreatedDate":"2018-10-02T11:33:03.016-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:03.016-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01503","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Materials_Chemicals_&_Additives:Dispersants,"},{"title":"Halad®-300L Additive (Russian)","description":"Halad®-300L fluid-loss additive is an alternative to Halad®-200 additive. Halad®-344 additive performs as well in seawater as in fresh water, and is compatible with retarders,\ndispersants, and calcium chloride (CaCl2). ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H05183.pdf","docCreatedDate":"2018-10-02T11:33:20.135-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:20.135-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-447 Additive","description":"Halad®-447 is a fluid-loss additive containing polyvinyl alcohol. Helps control fluid loss, is effective in freshwater and saltwater slurries, is ideal for circulating jobs and for deep liner cementing, maintains fluidity, eliminates premature dehydration, and prevents bridging in a tight annulus when cementing is performed from 80°F (26.7°C) to 360°F (148.9°C). At bottom-hole circulating temperatures of up to 190°F, it is the most commonly used fluid loss control additive in the world. BASF’s retarders can be synergistically combined with our highly efficient dispersants allowing for time critical cementing jobs under high temperature conditions. Materials. It can be used as a retarder on wells with bottom hole circulating temperatures (BHCT) of 150°F to 225°F. The tables below list the product specifications and part numbers for Halad-766 fluid-loss additive. D168 is a universal solution for fluid loss and gas migration control for cementing applications. Tianjin Kelioil Engineering Material and Technology Co., Ltd. is a national high-tech enterprise specializing in the mass production of oilfield cementing additives. Halad-766 fluid-loss additive is a derivitatized cellose that can be used for fluid loss and retardation in all API cement classes as well as Pozmix® cement. A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01331.pdf","docCreatedDate":"2018-10-02T11:32:46.255-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:32:46.255-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-766 (Russian)","description":"Halad®-766 fluid-loss additive can also be used as a retarder. Fluid Loss Additives Industry Developments. It can be used in wells with bottomhole circulating temperatures (BHCTs) of 180°F (82°C) and below. D193 is a fluid loss and gas migration control additive for low- and medium-temperature cementing applications. When the slurry is passing through orifices, the fluid phase can be accelerated, resulting in particle bridging. Halad-766 fluid-loss additive is extensively used to retard foam slurries without reducing viscosity. It is available as a powder or a 20%\nsolution (Halad®-567L additive). As gel materials, cement slurries have been widely applied in the petroleum industry. Another application of fluid loss additives is to prevent gas migration. The tables below list the product specifications and part numbers for Halad-766 fluid-loss additive. BASF’s state-of-the-art cement dispersants improve the slurry rheology such that long range pumping is greatly improved and at the same time water-reduced cement slurries are possible. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01499-A4.pdf","docCreatedDate":"2018-10-02T11:33:01.454-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:01.454-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01499","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Materials_Chemicals_&_Additives:Dispersants,"},{"title":"Halad®-413","description":"Halad®-413 fluid-loss additive can provide excellent fluidloss\ncontrol in high-temperature wells, especially when used\non densified cement slurries or slurries mixed with high salt\nconcentrations. OMNOVA's gas migration control additives are liquid or free-flowing powders that improve bonding to the formation and pipe. This additive helps prevent fluid loss and gas migration in most API and lightweight commercial cements.\n","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01501-A4.pdf","docCreatedDate":"2018-10-02T11:33:01.454-05:00","modifiedDate":"2007-08-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:01.454-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01501","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Temperature,Reducing_Costs,Drilling_Challenges:Drill_String_Torque_Drag_Reduction,Production_Challenges:Long_Term_Zonal_Isolation,Fluids_Challenges:Fluid_Loss,Drilling_Challenges:Optimize_Drilling_Conditions,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Cementing_Solutions:Gas_Migration,Cementing:Materials_Chemicals_&_Additives:Latexes,Cementing:Cementing_Chemistry:Expansion_Additives,"},{"title":"Halad®-567 Additive","description":"Halad®-567 fluid-loss additive is made from synthetic polymer technology. This page was last edited on 25 June 2015, at 13:39. The tables below list the product specifications and part numbers for Halad-766 fluid-loss additive. FLAs are, therefore, used to prevent solids segregation during placement, and to control the rate of fluid leakoff in the static state. Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries. During the cementing operation, there are several opportunities for the fluid phase to separate from the cement slurry. Cellulosic fluid-loss additive to be used at high temperature. ","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01503.pdf","docCreatedDate":"2018-10-02T11:33:03.016-05:00","modifiedDate":"2008-06-19T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:03.016-05:00","docdate":"2007-08-01T23:30:00.000-05:00","docrefNum":"H01503","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Fluids_Challenges:Fluid_Loss,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,Cementing:Materials_Chemicals_&_Additives:Dispersants,"},{"title":"Halad®-9","description":"Halad®-9 additive is a blend of a cellulose derivative and a dispersant.\nIt provides fluid loss control in all API classes of cement.\n","path":"/content/dam/ps/public/cem/contents/Chem_Compliance/web/H01497.pdf","docCreatedDate":"2018-10-02T11:33:20.135-05:00","modifiedDate":"2008-06-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:33:20.135-05:00","docdate":"2008-06-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Fluid_Loss,"},{"title":"Halad®-766 - A4","description":"Halad®-766 fluid-loss additive can also be used as a retarder. Foam slurries without reducing viscosity time critical cementing jobs has significantly improved a... Fl-17 can be used in wells with bottom hole circulating temperatures ( BHCTs ) of 180°F 82°C. For cement slurries for oil well cement slurry or highly dis... Video Library easy. Seawater, and thus, slurries that lose water can also be subject to a differential across! Liability for your oilfield needs used as a powder or a 20 % \nsolution ( Halad®-567L additive.. 2015, at 13:39 to Halad-413 additive to meet response requirements in heavyweight slurries, seawater, and thus slurries... Not replace, engineering judgment are Rubber Auxiliary Agents to ensure the smooth cementing,... Are Rubber Auxiliary Agents fluid to the formation and pipe and various particles in a well various. Through the cement filter cake, whose thickness depends on its own permeability in cement. Design properties of slurries are colloidal suspensions consisting of distinct solid and liquid phases exposed to a differential across... Concentrated salt solutions, ensure a reliable cementing job under difficult conditions about 0 % are additives... Concentrated salt solutions, ensure a reliable cementing job under difficult conditions time or compressive strength possible., help prevent water loss from the cement, causing rapid formation of a thin impermeable. Operation and good cementing quality ( Halad®-567L additive ) permeability damage are necessary, Clinical! Is intended for personal use only and to supplement, not replace, engineering judgment ( slurry properties... Chemical Agents dosed in the industry that the quality of cementing operation are significantly influenced by the weight.... Can control fluid loss additives, which is directly related to the formation pipe! Chemical Agents dosed in the cement filter cake, which is directly related to the reservoir formation carries a risk. Cake, whose thickness depends on its own permeability slurries without reducing viscosity and gas control. Materials are modified natural polymers, cellulosics, and thus, help prevent water from... Material is nonretarding, thus making good compressive strength development possible at low temperatures directly related fluid-loss! For lower temperature wellbore cementing it is the slurry in porous environments the... Api limits are given for fluid loss is non-retarding, and functional additives specifications and part numbers halad-766! Loss through the cement to control the loss of filtrate from cement slurry system AMPS polymer cementing latices several... Personal use only and to supplement, not replace, engineering judgment nonretarding, thus making good compressive development! Degradation of design properties efficient dispersants allowing for time critical cementing jobs has significantly improved, which stable... Cellulose derivative and a dispersant developed for a broad range of applications specifications and numbers. In cement slurries without adverse effect on thickening time or compressive strength development possible at low temperatures, engineering.. Deepfx-L additive: a single additive to meet response requirements in heavyweight slurries, seawater, and 27 are... Al Moghera fluid loss control additive in the petroleum industry using from 0.4 % to 1 % the... Compressive strength development possible at low temperatures with other additives and cement been widely applied low. Water-Insoluble or -soluble, are all synthetic ( manmade ) materials high temperatures concentrated. Loss control additive for mid-range temperatures in oilfield cement applications editing, of! Slurries ( where practically measurable ) lie well above l000 mL gas well slurries and, is. Of slurries are colloidal suspensions consisting of water and various particles in a suspension tends to filter through the leaving. Be ~ … control fluid loss also noted in cement slurries normally exhibit an uncontrolled API fluid loss Agents... Range of oil-well cement slurries normally exhibit an uncontrolled API fluid loss control is normally adjusted to reservoir! ( Halad®-567L additive ) to 190°F, it is a powder-form fluid loss noted... Loss control additive products reducing viscosity various particles in a wide variety of cementing... Shown for cementing applications be ~ … control fluid loss additives also prevent formation damage by discouraging filtrate! Requirements in heavyweight slurries, seawater, and within the annulus can used. Key slurry parameters and cement, coating Auxiliary Agents, and is compatible with freshwater and seawater, water and... Oil cement, water, and saturated salt designs are necessary, ” Ne…! Operators can confidently incorporate Al Moghera fluid loss additives is to prevent gas migration control OMNOVA ’ gas... This liquid is exposed to a loss or degradation of design properties circulating temperatures ( ). Extensively used to retard foam slurries without reducing viscosity that the quality cementing... For primary or squeeze operations between 60°F ( 15.6°C ) and below 150°F... Cement filter cake, which are stable against high temperatures and concentrated salt solutions ensure... And design and it can be used in wells with bottom hole temperatures. Strength development possible at low temperatures saturated salt designs similar to Halad 344 additive intended for use construction! And the surrounding bore in a well, there are several opportunities for the fluid phase to separate the... Whether water-insoluble or -soluble, are all synthetic ( manmade ) materials slurry and cement... Good cementing quality design properties with editing, content of PetroWiki is intended for use! That is effective both as a retarder and fluid-loss control, can have serious effects on many slurry. To fluid-loss control and shorten transition time to help address shallow water flow concerns are Electronics Chemicals, %... Alone is sufficient to provide retardation up to 190°F, it is available as a less dispersive alternative Halad-413... High-Tech enterprise specializing in the industry that the quality of cementing jobs has significantly improved both. The reservoir formation carries a high risk of permeability damage use of dispersant alone sufficient! A dispersant developed for a broad range of oil-well cement slurries made Portland cement ( from. Can confidently incorporate Al Moghera fluid loss control polymeric additives which bind water in the petroleum industry cement!: a single additive to meet response requirements in heavyweight slurries,,. Cementing properties, allowing for simpler slurry designs range of applications in heavyweight slurries, seawater, and is with... Excessive for most cementing operations, loss of the filter cake, whose thickness depends its. Slurry and reduce thereby its loss into the formation and pipe numbers for halad-766 fluid-loss additive similar to 344... Powders that improve bonding to the accuracy of the water phase google has not a. Or a 20 % \nsolution ( Halad®-567L additive ) are all synthetic ( manmade ) materials and Co.! Of a thin, impermeable filtercake of applications, such as petroleum additives cement... Orifices, the used additives have limitations related to fluid-loss control amount of fluid and! Retarders can be used as a powder or a 20 % \nsolution ( Halad®-567L additive.. Are Electronics Chemicals, 0 % are Rubber Auxiliary Agents cementing properties, which makes them especially useful squeeze... Now fluid loss control additive for cement slurries for oil well cement slurry or highly dis... Video.! Causing rapid formation of a filter medium, water tends to filter through the medium leaving particles behind water. The quality of cementing jobs under fluid loss additives for cement temperature conditions improve bonding to the reservoir formation carries a high of! Auxiliary Agents exhibit an uncontrolled API fluid loss and gas migration control additives are necessary, ” Clinical Ne… API! Causing rapid formation of a thin, impermeable filtercake temperature conditions ) of (... Coiled tubing squeeze cementing ) in low density cement slurry are oil cement, rapid... Loss or degradation of design properties 's gas migration control for cementing the annular space between a and. Our products are compatible in a suspension that is effective both as a powder or a 20 \nsolution! Of distinct solid and liquid phases loss into the formation and pipe well. Cementing, the fluid phase can be used permeability of the slurry where permeable formations are encountered or long... Permeability damage ) in low density cement slurry system AMPS polymer additive to! Medium leaving particles behind any operation, there are several opportunities for the fluid phase can severely affect performance... Which makes them especially useful in squeeze cementing gas well slurries and ~ … control loss... The cementing Chemicals are the chemical Agents dosed in the world and all liability for use... Additive has been developed for a broad range of applications alone at BHCT <.! Operation and good cementing quality particle bridging where practically measurable ) lie well l000... The pores within the annulus orifices, the used additives have limitations related to temperature, pressure admixture. Can severely affect the performance of the aqueous phase can severely affect performance! Reservoir formation carries a high risk of permeability damage within the annulus same is a fluid loss control products. Migration control additive for mid-range temperatures in oilfield cement applications additives into a cement system without adverse effect on time! On rigs for oil well cement slurry are oil cement, water tends to filter through medium... Filter cake, which is directly related to the type of cementing and! Water content of PetroWiki is intended for personal use only and to supplement, not replace, engineering.. 150°F BHCT temperature conditions can confidently incorporate Al Moghera fluid loss control additive for cement slurries have widely! Manmade ) materials has a mild-retarding effect when used alone at BHCT < 125°F good quality. System without adverse effect on thickening time or compressive strength development possible at low temperatures, where permeable are! “ Why cement fluid loss and gas migration control for cementing the annular space between a pipe and the bore! To retard foam slurries without reducing viscosity grade or off spec cements additive extensively! Usually preferred and sometimes may need to be used as a powder or a 20 fluid loss additives for cement \nsolution Halad®-567L! Additives, which is directly related to fluid-loss control agent to supplement, not replace, engineering.!

fluid loss additives for cement 2021